Command Reference ⤴

Alphabetical list of commands

Command Aliases →

progeCAD Commands

Click a letter to go to that section.

#

3D Array	3DARRAY	Creates multiple copies of entities in three dimensions.
3D Convert (3D Solid)	3DCONVERT	Converts three-dimensional solids to polyface meshes.
3D Face	FACE	Draws a planar surface defined by three or four points.
3D Fly	3DFLY	Allows you to view the model as though you are flying through or around it.
3D Meshes	3D	Draws three-dimensional surface primitives: box, cone, cylinder, dish, dome, mesh, sphere, pyramid, torus, and wedge.
3D Mirror	MIRROR3D	Reflects entities through a plane.
3D Polyline	3DPOLY	Draws a three-dimensional polyline with straight segments.
3D Positioner	3DPOSITIONER	Displays a visual aid, or gizmo, used to move and rotate entities in three-dimensional space.
3D Rotate	ROTATE3D	Rotates existing entities around a three-dimensional axis.
3D Walk	3DWALK	Allows you to view the model as though you are walking through it.

A

About	ABOUT	Displays the About progeCAD dialog box, which contains version and registration information.
ACIS In	ACISIN	Allows you to import ACIS files, which progeCAD can use to create body objects, solids, or regions.
ACIS Out	ACISOUT	Allows you to export ACIS entities such as surfaces, regions, and solids to an ACIS file in ASCII (SAT) format.
Add/Delete Scales	OBJECTSCALE or -OBJECTSCALE	Assigns annotation scales to one or more entities.
Add Current Scale	AIOBJECTSCALEADD	Assigns the current annotation scale to one or more entities.
Add Digital Signatures	DIGITALSIGN	Adds a digital signature to a drawing.
Add Leader Lines	AIMMLEADERADD	Adds one or more leader lines to existing multileader entities.
Add to Working Set	REFSET	Adds an entity from the drawing to the block that is being edited in-place.
Adjust Spacing	DIMSPACE	Distributes equal space between linear or angular dimensions.
AEC Entity Units	-DWGUNITS	Sets the drawing units to use for inserting and scaling AEC entities.
AEC Styles	AECSTYLES	Opens the AEC Styles Manager dialog box where you can view, create, copy, or edit AEC styles, load them from and to other drawing files.
Align	ALIGN	Allows you to align selected entities with other entities in three-dimensional space.
Align Multileader	MLEADERALIGN	Aligns multileaders.
Align Space	ALIGNSPACE	Changes the pan and zoom magnification of model space entities in a layout viewport so they align with entities in paper space or in other layout viewports.
Aperture	APERTURE	Sets the selection area for snapping to entities.
Apparent Intersection	APPARENT	Toggles the Apparent Intersection snap on or off.
Arc	ARC	Draws an arc of any size.
Arc-Aligned Text	ARCTEXT	Creates text that aligns with an arc.
Area	AREA	Calculates the area of entities or calculates defined areas.
Array	ARRAY or -ARRAY	Creates multiple copies of entities in either a rectangular (rows and columns) pattern or a polar (circular) pattern.
Arrange Icons	WIARRANGE	Arranges minimized drawing windows in a line at the bottom of the drawing area.
Artisan	ARTISAN	Starts Artisan Renderer to create a photorealistic image of your model.
Artisan Settings	ARTISAN-SETTINGS	Displays the Artisan for progeCAD dialog box so you can specify options for rendering using the Artisan command.
Artisan Sync	ARTISAN-SYNC	Sends the latest version of your model to Artisan Renderer and updates the content in Artisan Renderer.
Attach	ATTACH	Attaches a file to the current drawing.
Attach Leader to Annotation	QLATTACH	Connects any leader to an annotation in the drawing and moves the endpoint of the leader line to the annotation.
Attach Raster Image	IMAGEATTACH or -IMAGEATTACH	Attaches images to a drawing.
Attribute Display	ATTDISP	Shows all attributes, none, or those normally visible.
Audio Note	AUDIONOTE	Creates, plays, and deletes sound clips.
Audit	AUDIT	Checks the current drawing for errors.
Auto Number	TCOUNT	Adds numbering to text, multiline text, multileaders, or block attributes.
Auto Publish	AUTOPUBLISH	Automatically creates electronic files (.dwf/.pdf) from the current drawing and saves them to a specified location.

B

Background	BACKGROUND	Specifies settings for the background of the current view.
Base Point	BASE	Sets the base point for inserting this drawing into another drawing.
Beam	BEAM	Draws a beam, which is an architectural element placed between columns, walls and other beams.
Benchmark Auto	BENCHMARKAUTO	Opens the progeCAD Graphics Benchmark dialog box and runs graphics benchmarking tests automatically.
Benchmark Graphics	BENCHMARK	Opens the dialog box that allows you to run tests to benchmark graphics and send the results to progeCAD servers for further analysis.
BIM Explode	BIMEXPLODE	Breaks apart an attached BIM underlay into polyface meshes and polylines that can be edited.
BIM Properties	BIMPROP	Opens the BIM Properties pane which is used to browse information about and control content visibility of .rvt, .rfa, and .ifc files.
BIM Properties Close	BIMPROPCLOSE	Closes the BIM Properties pane that is used to browse information about and control content visibility of .rvt, .rfa, and .ifc files.
BIM Underlay	BIMATTACH	Attaches a Building Information Modeling (BIM) file as an underlay to the current drawing. You can attach .rvt, .rfa, and .ifc files.
Block Actions	BACTIONTOOL	Adds an action to a block definition. Available only in the Block Editor.
Block Count	BCOUNT	Counts the number of blocks in a selection set.
Block Editor	BEDIT or -BEDIT	Allows you to select a block to edit or enter a name for a new one to create in the Block Editor.
Block Parameters	BPARAMETER	Adds a parameter to a block definition. Available only in the Block Editor.
Block Scale	BSCALE	Changes the scale of a block reference relative to its insertion point.
BMP Out	BMPOUT	Displays the Save Bitmap dialog box so you can export the active viewport to a bitmap file (.bmp).
Boundary	BOUNDARY or -BOUNDARY	Creates a boundary polyline from a closed loop.
Box (3D Mesh)	AI_BOX(or BOX)	Draws a three-dimensional box as a mesh.
Box (3D Solid)	BOX	Draws a three-dimensional box as an ACIS solid.
Break	BREAK	Erases part of an entity, or splits an entity into two entities.
Break at Point	BREAKATPOINT	Splits two-dimensional entities into two entities at a single break point.
Break Line	BREAKLINE	Draws a polyline that has a breakline symbol.
Browser	BROWSER	Starts your Web browser at a location that you specify.

C

Calculator	CAL	Displays the standard Windows Calculator.
Capture Area	GEOMAPIMAGE	Creates an image entity by selecting a window on the on-line map background.
Cascade	WCASCADE	Cascades the open drawing windows.
Center Line	CENTERLINE	Creates an associative linear entity, called a center line, between two lines or two linear segments of polylines.
Center Mark	CENTERMARK	Draws an associative marker, called a center mark, at the center of a circle or arc.
Center	CENTER	Toggles the Center snap on or off.
Chamfer	CHAMFER	Creates a chamfer, or beveled edges, at the intersection of two lines.
Chamfer Edges	CHAMFEREDGE	Creates a chamfer, or a beveled edge, at the intersection of 3D solid faces.
Change	CHANGE	Changes the location, size, color, elevation, layer, linetype, linetype scale, and thickness of selected entities.
Change Block	CHANGEBLOCK	Changes the name of a single block instance and then opens the Block Editor where you can modify it.
Change Properties	CHPROP	Changes the properties of selected entities using the command prompt instead of the Properties palette.
Change Space	CHSPACE	Copies or moves selected entities from paper space to model space or from model space to paper space.
Change Text Case	TCASE	Changes the case of multiline text and single-line text.
Check Spelling	SPELL	Checks the spelling of single-line text, multiline text, paragraph text, attributes, attribute definitions, and dimension text.
Circle	CIRCLE	Draws a circle of any size.
Clean Screen Off	CLEANSCREENOFF	Reverses the CLEANSCREENON command so that all the user interface items that were hidden are displayed.
Clean Screen On	CLEANSCREENON	Hides the user interface items that are selected in the Clean Screen Options dialog box.
Clean Screen Options	CLEANSCREENOPTIONS	Determines which user interface items are hidden by the CLEANSCREENON command.
Clear Entity Snaps	NONE	Turns all entity snaps off.
Clip Image	IMAGECLIP	Clips images so that only a portion of the image is visible in a drawing.
Clip Layout Viewport	VPCLIP	Clips layout viewports so that only a portion of the viewport is visible on a Layout tab.
Clip Xref	XCLIP	Defines a clipping boundary after you attach a drawing as an external reference.
Clone	ADDSELECTED	Draws a new entity of the same type and properties as a selected entity.
Close	WCLOSE	Closes the active drawing window without exiting the program.
Close All	WCLOSEALL	Closes all drawing windows.
Close All Others	CLOSEALLOTHER	Closes all drawing windows except the current one.
Close Block Editor	BCLOSE	Closes the Block Editor. Available only in the Block Editor.
Close Reference	REFCLOSE	Closes the block or external reference that is being edited in-place and returns to the drawing.
Code Page Manager	CODEPAGE	Displays the Code Page Manager dialog box so you can specify character sets.
Collect Multileaders	MLEADERCOLLECT	Collects multileaders that include blocks into a row or column.
Colors	COLOR or -COLOR	Establishes the color for all entities that you draw after you select the command.
Command Bar	CMDBAR	Turns the command bar on and off; when on, this command positions the command bar.
Commands	COMMANDS	Displays a list of commands.
Cone (3D Mesh)	AI_CONE (or CONE)	Draws a three-dimensional cone as a mesh.
Cone (3D Solid)	CONE	Draws a three-dimensional cone as an ACIS solid.
Constrained Orbit	3DORBIT	Allows you to orbit the drawing, or rotate the view, in real time while forcing the camera x-axis to be parallel to the world view XY plane.
Constrained X Orbit	RTROTX	Allows you to rotate the view of entities in real time while maintaining the x-axis.
Constrained Y Orbit	RTROTY	Allows you to rotate the view of entities in real time while maintaining the y-axis.
Constrained Z Orbit	RTROTZ	Allows you to rotate the view of entities in real time while maintaining the z-axis.
Construction Line	CLINE	Draws a construction line.
Continuous Orbit	3DCORBIT	Allows you to rotate the view of entities using continuous motion.
Convert Block to Xref	INSERTTOXREF	Converts a block to an external reference.
Convert CTB Print Style Table	COVERTCTB	Converts a color-dependent print style table to a named print style table.
Convert Drawing Print Style Tables	CONVERTPSTYLES	Changes the type of print style table used by the current drawing.
Convert Old Lights	CONVERTOLDLIGHTS	Updates lights in the drawing that were created in older formats to the current light format.
Convert Old Materials	CONVERTOLDMATERIALS	Updates materials in the drawing that were created in older formats to the current materials format.
Convert to Mesh	CONVTOMESH or -CONVTOMESH	Converts different types of entities to mesh entities.
Convert to NURBS	CONVTONURBS	Converts surfaces and 3D solids to NURBS surfaces.
Convert to Surface	CONVTOSURFACE	Converts different types of entities to 3D surfaces.
Convert to Solid	CONVTOSOLID	Converts different types of three-dimensional entities to 3D solids.
Coons Surface	EDGESURF	Draws a three-dimensional polygon mesh with vertices averaged between four edges.
Coordinate	COORDINATE	Changes the coordinate display on the status line: on, off, and relative coordinates.
Copy	COPYCLIP	Copies the selection to the Windows Clipboard.
Copy (Entity)	COPY	Draws a duplicate of the selected entities.
Copy Entity Data	COPYEDATA	Copies the entity data of the selected entities.
Copy Entity Formatting	MATCHPROP	Copies the properties from one entity to another.
Copy History	COPYHIST	Copies the text of the Prompt History window to the Windows Clipboard.
Copy Link	COPYLINK	Copies the contents of the current view to the Windows Clipboard.
Copy Multiple	COPYM	Copies entities using multiple options.
Copy Nested Entities	NCOPY	Copies the contents of the current view to the Windows Clipboard.
Copy with Base Point	COPYBASE	Copies selected entities to the Windows clipboard along with a base point.
Create Block	BLOCK or -BLOCK	Forms a single compound entity from a group of entities.
Create Camera	CAMERA	Creates a 3D view of the drawing according to a location and target.
Create or Edit Entity Data	EDITEDATA	Creates or edits the extended entity data of an entity.
Crosshairs Toggle	CROSSHAIRTOGGLE	Determines whether the cursor displays as a gun sight crosshairs.
CSV Out	TABLEEXPORT	Exports data from a table to a text file in the Comma-Separated Values format.
CUI Export	CUIEXPORT	Opens the Transfer tab of the Customize User Interface dialog box so you can easily transfer customized settings between the main and partial .cui files.
CUI Import	CUIIMPORT	Opens the Transfer tab of the Customize User Interface dialog box so you can easily transfer customized settings between the main and partial .cui files.
Cursor Toggle	CURSORTOGGLE	Determines whether the pointer displays as the default Microsoft Windows small box (Off) or the crosshairs (On).
Curtain Wall	CURTAINWALL	Draws an architectural curtain wall.
Customize Aliases	ALIASEDIT	Opens the Customize dialog box where you can create and modify aliases.
Customize Tool Palettes	CUSTOMIZE	Allows you to create groups of palettes, set the current tool palette group, and import and export tool palette files.
Customize User Interface	CUI	Displays the Customize User Interface dialog box so you can change settings and commands for workspaces and customization files.
Cut	CUTCLIP	Cuts (removes) the selection from your drawing and places it on the Windows Clipboard.
Cylinder (3D Mesh)	AI_CYLINDER (or CYLINDER)	Draws a cylinder as a 3D mesh.
Cylinder (3D Solid)	CYLINDER	Draws a three-dimensional cylinder as an ACIS solid.

D

Data Link Manager	DATALINK	Displays the Data Link Manager dialog box where you can create and view links to data located in a Microsoft Excel (.xls, .xlsx) file.
Data Link Update	DATALINKUPDATE	Applies changes to or from a linked .xls or .xlsx file.
Database List	DBLIST	Lists the database information for every entity in the current drawing.
Define Attributes	ATTDEF or -ATTDEF	Creates an attribute definition, which is an entity consisting of a name, prompt for information, display characteristics, and default text.
Define View	DVIEW	Dynamically defines parallel or visual perspective views.
Delay	DELAY	Delays carrying out the next command for a specified time.
Delete	DELETE	Deletes selected entities from your drawing.
Delete Current Scale	AIOBJECTSCALEDELETE	Deletes the current annotation scale from one or more entities.
Delete Entity Data	DELEDATA	Deletes program-specific entity data that is attached to an entity.
Developer Help	HELPDEV	Displays online help for application developers.
DGN In	DGNIMPORT	Displays the Import DGN Drawing dialog box so you can import a MicroStation Design (.dgn) file.
DGN Out	DGNOUT	Exports the current drawing to a DGN version 8 file.
DGN Underlay	DGNATTACH	Attaches a .dgn file as an underlay.
Dimensions	DIMENSION	Places progeCAD in the dimension mode.
Dimension Aligned	DIMALIGNED	Adds dimensions that are aligned to entities.
Dimension Angular	DIMANGULAR	Annotates the angle between two selected entities.
Dimension Arc	DIMARC	Adds dimensions that measure arcs or arc segments.
Dimension Baseline	DIMBASELINE	Continues a linear, angular, or ordinate dimension from a previous dimension.
Dimension Break	DIMBREAK	Adds a break to dimensions or multileaders at a point where they intersect with other entities, or removes a break.
Dimension Center Point	DIMCENTER	Places a non-associative marker at the center of a circle or an arc.
Dimension Continue	DIMCONTINUE	Continues a dimension.
Dimension Diameter	DIMDIAMETER	Measures the diameter of a circle or an arc.
Dimension Edit	DIMEDIT	Edits dimension lines and text.
Dimension Jog Line	DIMJOGLINE	Places a jog line on a linear or aligned dimension, or deletes it.
Dimension Jogged	DIMJOGGED	Adds a jogged dimension that measures the radius of a circle, arc, or polyline arc.
Dimension Edit	DIMEDIT	Edits dimension lines and text.
Dimension Leader	DIMLEADER	Draws a line, or sequence of lines, for controlled placement of dimension text.
Dimension Linear	DIMLINEAR	Adds horizontal or vertical dimensions to entities.
Dimension Ordinate	DIMORDINATE	Adds coordinate point dimensions.
Dimension Override	DIMOVERRIDE	Overrides the style settings for a given set of dimensions.
Dimension Radius	DIMRADIUS	Measures the radius of a circle or an arc.
Dimension Reposition Text	DIMTEDIT	Defines the position and angle of dimension text.
Dimension Rotated	DIMROTATED	Adds horizontal and vertical dimensions to entities.
Dimension Styles Manager	SETDIM	Displays the Dimension Styles Manager dialog box so you can create, modify, and manage dimension styles.
Disassociate Dimension	DIMDISASSOCIATE	Changes associative dimensions to non-associative.
Dish (3D Mesh)	AI_DISH (or DISH)	Draws the lower half of a sphere as a 3D mesh.
Dish (3D Solid)	DISH	Draws the lower half of a three-dimensional sphere as an ACIS solid.
Display Image Frame	IMAGEFRAMEMODE	Controls whether image frames are visible and printed.
Distance	DIST	Measures the distance and angle between two points.
Distant Light	DISTANTLIGHT	Adds a distant light to your drawing for rendering.
Divide	DIVIDE	Places markers along a selected entity.
Dome (3D Mesh)	AI_DOME (or DOME)	Draws the upper half of a three-dimensional sphere as a 3D mesh.
Dome (3D Solid)	DOME	Draws the upper half of a three-dimensional sphere as an ACIS solid.
Donut	DONUT OR DOUGHNUT	Draws a filled circle or flat ring created as a polyline.
Doors	DOOR	Draws an architectural door.
Dragmode	DRAGMODE	Switches the dragged-entity display between on, off, and auto.
Draw Order	DRAWORDER	Changes the order in which entities are drawn and printed.
Draw Orthogonal	ORTHOGONAL	Constrains the drawing so that you can enter only lines aligned with the grid.
Drawing Limits	LIMITS	Changes the drawing boundaries and controls checking of those boundaries for the current space.
Drawing Properties	DWGPROPS	Displays properties for the drawing, some of which you can define such as keywords and comments.
Drawing Settings	DSETTINGS	Displays the Drawing Settings dialog box so you can define various drawing settings.
Drawing Status	STATUS	Displays all dimensioning variables and their current values in the Prompt History window.
DWF Out	DWFOUT	Exports the current drawing to a Design Web Format (DWF) version 6.0 file in ASCII format.
DWF Underlay	DWFATTACH	Attaches a .dwf file as an underlay.
DXB In	DXBIN	Displays the Load DXB File dialog box so you can import a Drawing Exchange Binary file.
DXF In	DXFIN	Displays the Load DXF File dialog box so you can import a Drawing Interchange File.
DXF Out	DXFOUT	Displays the Select DXF File dialog box so you can export a Drawing Interchange File.
Dynamic View Control	VIEWCTL	Displays the Dynamic View Control dialog box so you can dynamically control the viewports.

E

Edge	EDGE	Changes visibility of edges of three-dimensional face entities that were created using the 3D Face command.
Edit Array	ARRAYEDIT	Edits associative arrays.
Edit Attributes (Multiple)	-ATTEDIT	Edits the attribute text associated with blocks.
Edit Attributes (Single)	EATTEDIT	Displays the Attribute Editor dialog box so you can edit the value, text style and properties of each attribute in the selected block reference.
Edit Hatch	HATCHEDIT	Modifies existing hatches or gradients.
Edit In-Place	REFEDIT or -REFEDIT	Edits the contents of a block or external reference after it has been inserted in the drawing.
Edit Length	EDITLEN	Changes the length of an open-ended entity or the included angle of an arc.
Edit Multileader	MLEADEREDIT	Adds or removes leader lines to or from existing multileaders.
Edit Multiline Text	MTEDIT	Edits multiline text entities.
Edit Polyline	EDITPLINE	Edits polyline entities.
Edit Spline	SPLINEDIT	Edits spline entities.
Edit Table	TABLEDIT	Modifies text in a selected table cell.
Edit Text	DDEDIT	Modifies selected text entities.
Elevation	ELEVATION	Changes the elevation and thickness of future entities that you draw.
Elevation Line	ELEVATIONLINE	Creates an elevation line which determines a two-dimensional projection view of the drawing.
Elevation Line Generate	ELEVATIONLINEGENERATE	Adds a new two-dimensional projection from an existing elevation line.
Elevation Line Reverse	ELEVATIONLINEREVERSE	Reverses the direction of an existing elevation line.
Ellipse	ELLIPSE	Draws ellipses.
Elliptical Arc	ELLIPSE	Draws elliptical arcs.
Enclose Text with Shape	TCIRCLE	Draws a frame around each selected single-line text, multiline text or attribute definition.
Endpoint	ENDPOINT	Toggles the Endpoint snap on or off.
Entity Snap Settings	SETESNAP	Displays the Drawing Settings dialog box so you can change the Entity Snaps.
Entity Snap Tracking	ENTTRACK	Turns entity snap tracking on and off.
Entity Snaps	ESNAP	Locates points precisely on reference points of entities.
eTransmit	ETRANSMIT	Collects related files and packages them together for transfer to another computer.
Exit	EXIT	Exits progeCAD.
Explode	EXPLODE	Ungroups a block, polyline, or hatch, creating separate entities for each element.
Explode Attributes	BURST	Ungroups blocks, creating separate entities for each element and converting attributes to text.
Explode Text	TXTEXP	Breaks multiline text and single-line text into polylines.
Explore Blocks	EXPBLOCKS	Displays the Explorer so you can view, create, copy, or edit blocks.
Explore Coordinate Systems	EXPUCS	Displays the Explorer so you can view, create, copy, or edit user coordinate systems definitions.
Explore Dimension Styles	EXPDIMSTYLES	Displays the Explorer with the Dimension Styles element selected. You can cut, copy, and paste dimension styles from one drawing to another.
Explore External References	EXPREFS	Displays the Explorer with the External References element selected. You can cut, copy, and paste external references from one drawing to another.
Explore Groups	EXPGROUPS	Displays the Explorer with the Groups element selected.
Explore Layers	EXPLAYERS	Displays the Explorer so you can view, create, copy, or edit layers.
Explore Layouts	EXPLAYOUTS	Displays the Explorer so you can view, create, copy, or edit layouts.
Explore Layer States	EXPLAYERSTATES	Displays the Explorer so you can view, create, copy, or edit layer states.
Explore Linetypes	EXPLTYPES	Displays the progeCAD Eplorer with the Linetype Name list displayed.
Explore Materials	EXPMATERIALS	Displays the Explorer with the Materials element selected, so you can view materials and assign them to entities.
Explore Multileader Styles	EXPMLEADERS	Displays the Explorer with the list of multileader styles.
Explore Multiline Styles	EXPMLINES	Displays the Explorer with the list of multiline styles.
Explore Table Styles	EXPMATERIALS	Displays the Explorer with the list of table styles.
Explore Text Styles	EXPFONTS	Displays the Explorer so you can view, create, copy, or edit fonts.
Explore Views	EXPVIEWS	Displays the Explorer with the View Name list displayed.
Explore Visual Styles	EXPVSTYLES	Displays the Explorer with the list of visual styles.
Explorer	EXPLORER	Displays the Explorer so you can view, create, copy, or edit different elements of your drawing.
Export	EXPORT	Displays the Export Drawing File As dialog box so you can export the drawing to a selected file type.
Export Layout to Model	EXPORTLAYOUT	Exports the current layout to model space in a new drawing.
Export System Variables	SVEXPORT	Saves all system variables with their current settings to an .svf file.
Extend	EXTEND	Lengthens a line, arc, or polyline to meet another entity.
Extension	EXTENSION	Toggles the Extension snap on or off.
Extract Attributes	ATTEXT or -ATTEXT	Extracts attribute data (informational text) from a drawing to a DXF or TXT file.
Extract Data	DATAEXTRACTION	Extracts data from entities in one or more drawings and exports it to a table or external file.
Extract Isolines	SURFEXTRACTCURVE	Extracts isolines and creates curves from contours of three-dimensional solids and surfaces.
Extrude	EXTRUDE	Creates a three-dimensional solid by lengthening closed entities along a path or to a specified height.
Extruded Surface	TABSURF	Creates a polygon mesh approximating a general tabulated surface defined by a path and a direction vector.

F

Field	FIELD	Inserts a field as multiline text.
File Converter	INTELLICONVERT	Converts one or more drawings to a new file version and format.
File Tabs	FILETAB	Turns the display of file tabs at the top of the drawing area on.
File Tabs Close	FILETABCLOSE	Turns the display of file tabs at the top of the drawing area off.
Fill	FILL	Controls whether solids and wide polylines are automatically filled when displayed and output.
Fillet	FILLET	Creates a fillet, or rounded corner, at the intersection of 3D solids, two lines, rays, or infinite lines.
Fillet Edges	FILLETEDGE	Creates a fillet, or rounded corner, at the intersection of 3D solid faces.
Filter	FILTER	Allows you to specify and filter entities to include in the selection set.
Filters	FILTERS	Allows you to delete layer filters.
Find and Replace	FIND	Searches for text and optionally replaces it.
Flatten	FLATTEN	Flattens three-dimensional entities to two dimensions.
Frames	TFRAMES	Toggles the display of image and wipeout frames.
Free Orbit	3DFORBIT	Allows you to rotate the view of entities in real time.
Freehand	FREEHAND	Draws a line entity using segments of a predetermined length.
From Point	FROM	Sets a temporary base point from which to offset point selection (available while using a command that requests a point).
Full Render	FULLRENDER	Creates a photorealistic image of your model, complete with light sources, shadows, surface material properties, and reflections.

G

Geographic Map	GEOMAP	Displays an on-line map provided by a mapping service in the current viewport.
Geometric Center	GCENTER	Toggles the Geometric Center snap on or off.
Get Selection	GETSEL	Selects all entities in a drawing that match both the layer of an entity you select and the type of an entity you select.
Global Attach Leader to Annotation	QLATTACHSET	Connects all leaders in a selection set to their respective annotations.
Global Detach Leader from Annotation	QLDETACHSET	Detaches all leaders in a selection set from their respective annotations.
Global Edit Attributes	GATTE	Globally edits the attribute text associated with blocks.
Gradient	GRADIENT	Allows you to add or edit gradients, which apply color patterns to closed entities within specified boundaries.
Graphics Screen	GRAPHSCR	Switches between the Prompt History window and the drawing window.
Group Edit	GROUPEDIT	Adds or removes entities from a group.
Group Manager	GROUP	Creates and modifies groups of entities in your drawing.
Group Selection	TOGGLEPICKSTYLE	Determines whether a group is selected when a sub-entity within the group is selected.

H

Hatch	BHATCH	Allows you to add and edit hatches to closed entities within specified boundaries.
Hatch Generate Boundary	BHATCH	Generates a boundary around a hatch.
Hatch Selection	---	Determines whether an associative hatch is selected when its boundary entities are selected.
Helix	HELIX	Draws a spiral.
Help	HELP	Displays context-sensitive online Help for the current command.
Hide	HIDE	Regenerates a three-dimensional visualization with hidden lines removed.
Hide CV	CVHIDE	Turns off the display of control vertices of NURBS surfaces and curves.
Hide Edges	HIDEEDGES	Hides the edges of a 3D face, mesh or polyface mesh.
Hide Entities	HIDEOBJECTS	Turns off the display of selected entities.
Hide Palettes	HIDEPALETTES	Hides all visible palettes, the ribbon, the quick access toolbar, and drawing tabs.
Hyperlink	HYPERLINK	Allows you to attach hyperlinks to drawing entities.
Hyperlink Options	HYPERLINKOPTIONS	Determines whether to display the hyperlink cursor, shortcut menu and tooltip when you hover over entities with attached hyperlinks.

I

ID Coordinates	IDPOINT	Displays the user coordinate system coordinates of a specified point.
IFC In	IFCIMPORT or -IFCIMPORT	Imports a Building Information Modeling (BIM) file in the .ifc file format.
IFC Out	IFCEXPORT	Exports your drawing to a Building Information Modeling (BIM) file in the .ifc file format.
IGES In	IGESIMPORT	Displays the Import IGES File dialog box so you can import an IGES (Initial Graphics Exchange Specification) model data file.
IGES Out	IGESEXPORT	Allows you to export ACIS entities such as surfaces, regions, and solids to an IGES (Initial Graphics Exchange Specification) format file with .iges or .igs extension.
Image About	IMAGEABOUT	Displays the version number for the image features.
Image Manager	IMAGE or -IMAGE	Allows you to attach, unload, reload, detach, and change the path of images.
Image Quality	IMAGEQUALITY	Changes the display quality of all images in a drawing to high quality or draft quality.
Import	IMPORT	Displays the Import Drawing dialog box so you can import another drawing file into the current drawing.
Import System Variables	SVIMPORT	Imports custom system variable settings from an .svf file to the drawing.
Infinite Line	INFLINE	Draws an infinite line in both directions from a specified starting point.
Input Search Options	INPUTSEARCHOPTIONS or -INPUTSEARCHOPTIONS	Determines how command names are suggested when typing in the command bar.
Insert Block	INSERT or -INSERT	Inserts a block or another drawing into the current drawing.
Insertion Point	INSERTION	Toggles the Insertion Point snap on or off.
Inspection Dimension	DIMINSPECT or -DIMINSPECT	Creates or removes inspection labels for dimensions.
Interfere	INTERFERE	Creates a composite three-dimensional solid from the interference, or common volume, of two or more solids.
Intersect (3D Solid)	INTERSECT	Creates a composite solid or region from the intersection of two or more solids or regions. Areas outside of the intersection are removed.
Intersection	INTERSECTION	Toggles the Intersection snap on or off.
Isolate Entities	ISOLATEOBJECTS	Turns off the display of all entities except those you select.
Isometric Plane	ISOPLANE	When the isometric grid is turned on, toggles the isometric plane between left, right, and top.

J

Join	JOIN	Joins two entities (two or more lines, or two or more arcs) into one entity.
Justify Text	TJUST	Changes the insertion point of selected text entities without changing their locations.

K

L

Layer	LAYER	Creates named drawing layers and assigns color and linetype properties to those layers.
Layer by Entity	LAYBYENT	Allows you to select an entity to control the current layer, freeze/thaw, on/off, lock/unlock, or viewport layer settings.
Layer Current	LAYCUR	Allows you to select one or more entities and assign the selection the current layer.
Layer Delete	LAYDEL	Deletes all entities on a layer and the layer itself.
Layer Freeze	LAYFRZ	Freezes the layer of a selected entity.
Layer Isolate	LAYISO	Isolates all layers except those assigned to the one or more entities you select.
Layer Isolate VP Freeze	LAYVPI	Isolates the layer of a selected entity in the current viewport.
Layer Lock	LAYLCK	Locks the layer assigned to a selected entity.
Layer Match	LAYMCH	Changes the layer of selected entities to match the layer of another selected entity.
Layer Off	LAYOFF	Turns off the layer assigned to a selected entity.
Layer On	LAYON	Turns on all layers in the current drawing.
Layer Previous	LAYERP	Reverses the last change made to layer settings.
Layer States Manager	LAYERSTATE	Displays the Layer States Manager dialog box so you can view, restore, create, edit, import, and export layer states.
Layer Thaw	LAYTHW	Thaws all layers in the current drawing.
Layer Unlock	LAYULK	Unlocks the layer assigned to a selected entity.
Layer Unisolate	LAYUNISO	Reverses the changes made when isolating layers.
Layout	LAYOUT	Allows you to create, delete, and rename layouts, set a layout as the current layout, and list layouts.
Layout Viewports	MVIEW	Creates and controls viewpoints.
Level Settings	LEVELSETTINGS	.
Levels Manager	LEVELS	.
Lighting	LIGHTING	Defines light sources and effects that will illuminate your model when you render it using the Full Render command.
Line	LINE	Draws straight lines of any length.
Linetype Manager	LINETYPE or -LINETYPE	Defines linetypes (sequences of alternating line segments, dots, and spaces), loads them from libraries, and sets the current linetype.
Linetype Scale	LTSCALE	Sets the scale factor you want applied to all linetypes within the drawing.
Links	OLELINKS	Lists, updates, and modifies linked objects within a drawing file.
List Entity Information	LIST	Lists the database information for selected entities.
List Viewport Scale	VPSCALE	Reports the scale of a selected viewport.
List Xref/Block Properties	XLIST	Lists property information for a selected external reference or and block.
Live Section	LIVESECTION	Turns live sectioning on or off for a selected section entity.
Load	LOAD	Loads a compiled shape file (.SHX) that defines shapes.
Load Application	APPLOAD	Displays the Load Application Files dialog box so you can load LISP, SDS, TX, and IRX programs that do not automatically load.
Load Classic .NET Application	NETLOAD	Displays the Open an Assembly dialog box so you can load a .NET .DLL application.
Loft	LOFT	Creates a three-dimensional solid or surface between two or more cross sections.
Log File Name	LOGFILENAME	Names the file you want created when you use LOGFILEON to save information in the Prompt History window.
Log File Off	LOGFILEOFF	Closes the text file created with LOGFILEON.
Log File On	LOGFILEON	Writes all commands and prompts in the Prompt History window to a text file.

M

Map Image Type	GEOMAPIMAGESETMAPTYPE	Changes the appearance of existing map images to aerial, road or hybrid.
Make Oblique	DIMEDIT	Makes dimension lines slanted.
Make Snapshot	MSNAPSHOT	Displays the Snapshot to Create dialog box so you can create a slide file from the current display.
Map Image Resolution	GEOMAPIMAGESETRESOLUTION	Sets the resolution of existing map images to very fine, fine, optimal or coarse.
Map Image Type	GEOMAPIMAGESETMAPTYPE	Changes the appearance of existing map images to aerial, road or hybrid.
Map Import	MAPIMPORT	Imports data from .shp, .sdf and .sqlite shapefiles and also from PostgreSQL, MySQL, and WFS servers.
Map Service	GEOMAPSERVICE	Turns map services on and off for geographic locations.
Mark Position	GEOMARKPOSITION	Places a position marker at a specified point in the map image.
Mark Position - Lat-Long	GEOMARKLATLONG	Places a position marker by specifying its latitude and longitude.
Mark Position - My Location	GEOMARKME	Places a position marker using your current coordinates.
Mark Position - Point	GEOMARKPOINT	Places a position marker at a specified point in the map image.
Marker Blips	BLIPMODE	Turns marker specification points on and off.
Mass Properties	MASSPROP	Calculates the mass properties of regions or solids.
Match Cell	MATCHCELL	Copies the properties of a source table cell and applies them to selected cells.
LEGACYMATERIALS	LEGACYMATERIALS	Assigns material properties to entities, enhancing the visual appearance of the model when you render it with the Full Render command.
Maximize Viewport	VPMAX	Enlarges a viewport so that it fills the drawing window.
Measure	MEASURE	Places markers at specified intervals along a selected entity.
Menu	MENU or -MENU	Replaces the current menu, toolbar, alias, keyboard, and ribbon settings with the settings of the file you load.
Member Miter	MEMBERMITER	Joins two beams into a mitered joint.
Menu Load	MENULOAD or -MENULOAD	Loads (imports) a menu file and adds its settings to the current settings.
Menu Unload	MENUUNLOAD or -MENUUNLOAD	Exports menu files.
Mid Between 2 Points	M2P	Sets a temporary midpoint snap between two points (available while using a command that requests a point).
Midpoint	MIDPOINT	Toggles the Midpoint snap on or off.
Migrate UI	MIGRATE	Migrates customizations from a previous installation to the current one.
Minimize Viewport	VPMIN	Reduces a maximized viewport and returns to the standard arrangement of viewports.
Mirror	MIRROR	Reflects entities through a line.
Model and Layout Tabs	SHOWTAB	Turns the display of the Model and Layout tabs at the bottom of the drawing window on or off.
Model Space Toggle	MSPACE	Switches to model space.
Move	MOVE	Moves, copies, rotates, and scales selected entities within a single command.
Move/Copy/Rotate	MOCORO	Moves, copies, rotates, and scales selected entities within a single command.
Move Entity Data	MOVEEDATA	Moves entity data.
Multileader	MLEADER	Draws a line, or sequence of lines, for controlled placement of multiline text or a block.
Multileader Style Manager	MLEADERSTYLE	Displays the Multileader Styles Manager dialog box so you can create and modify multileader styles.
Multiline	MLINE	Draws multilines of any length.
Multiline Style	MLSTYLE	Displays the Multiline Style dialog box so you can create and modify multiline styles.
Multiline Text	MTEXT or -MTEXT	Creates paragraph text.
Multiple	MULTIPLE	Repeats the next command until you cancel it.
Multiple Insert	MINSERT	Inserts multiple copies of a block in a rectangular pattern.

N

Nearest	NEAREST	Toggles the Nearest snap on or off.
New	NEW	Creates a new drawing.
New Select	PSELECT	Clears the previous selection before grouping entities into a new selection set for use in subsequent commands.
New Window	WOPEN	Opens an additional window containing the current drawing.
Notepad	NOTEPAD	Opens the standard Windows Notepad.
Node	NODE	Toggles the Node Snap (or Point Snap) on or off.

O

OBJ In	OBJIN	Displays the Import OBJ File dialog box so you can import an OBJ (Wavefront Technologies) file.
OBJ Out	OBJOUT	Exports three-dimensional models to an OBJ (Wavefront Technologies) file.
Object	INSERTOBJ	Displays the Insert Object dialog box so you can insert an ActiveX object into the drawing.
Offset	OFFSET	Creates offset curves and parallel lines.
Onweb	ONWEB	Allows you to access a company Web site.
Open	OPEN	Displays the Open Drawing dialog box so you can open an existing drawing.
Open External Drawing	OPENEXT	Loads a .dwg file into memory without opening it in progeCAD.
Options	OPTIONS	Displays the Options dialog box so you can specify the default settings (such as Axis Color, and Search Paths).
Overkill	OVERKILL	Deletes or combines duplicate or overlapping entities in the drawing.

P

Page Setup Manager	PAGESETUP	Displays the Page Setup Manager dialog box so you can set and save options for printing drawings.
Pan	PAN or -PAN	Moves the display window.
Paper Space Toggle	PSPACE	Switches to paper space.
Parallel	PARALLEL	Toggles the Parallel snap on or off.
Paste	PASTECLIP	Pastes the contents of the Windows Clipboard into the current drawing.
Paste as Block	PASTEBLOCK	Pastes the contents of the Windows Clipboard into the current drawing as a block.
Paste Special	PASTESPEC	Inserts data from the Windows Clipboard into the current drawing.
Paste to Original Coordinates	PASTEORIG	Places the contents of the Clipboard into the active drawing using the same coordinates as in the original drawing.
Path Array	ARRAYPATH	Creates multiple copies of a selected entity and distributes them evenly along a path.
PDF In	PDFIMPORT	Imports data from a .pdf file or underlay into the drawing.
PDF Out	PDFEXPORT	Exports the current drawing to a two-dimensional or three-dimensional PDF (Portable Document Format) file.
PDF Underlay	PDFATTACH	Attaches a .pdf file as an underlay.
Perpendicular	PERPENDICULAR	Toggles the Perpendicular snap on or off.
Plan View	PLAN	Places the display in plan view (V point 0,0,1) relative to either the current user coordinate system (UCS), a specified UCS, or the World Coordinate System.
Planar Surface	PLANESURF	Creates a planar surface.
Plane	PLANE	Draws a solid, two-dimensional surface.
Plane Solve	PLANESOLVE	Creates roof or ceiling planes using plane symbols.
Plane Symbol	PLANESYMBOL	Attaches roof or ceiling plane symbols to walls.
Point	POINT	Draws single point entities.
Point Cloud Underlay	POINTCLOUDATTACH	Attaches a point cloud file as an underlay to the current drawing.
Point Light	POINTLIGHT	Adds a point light to your drawing for rendering.
Polar Array	ARRAYPOLAR	Creates multiple copies of entities in a polar (circular) pattern.
Polar Tracking	POLARTRACK	Turns polar tracking on and off.
Polyface Mesh	PFACE	Creates a three-dimensional mesh of arbitrary complexity and surface characteristics.
Polygon	POLYGON	Draws polygons with a specified number of sides.
Polygon Mesh	MESH	Defines a three-dimensional polygon mesh by specifying its size (in terms of M and N) and the location of each vertex in the mesh.
Polyline	POLYLINE	Draws two-dimensional polylines (connected line and arc segments) with optional width and taper.
Polysolid	POLYSOLID	Creates a three-dimensional solid with a rectangular profile from a line, arc, polyline, or circle.
Preset Viewpoints	SETVPOINT	Displays the Preset Viewpoints dialog box so you can change the direction in which three-dimensional entities are viewed.
Print	PRINT	Displays the Print dialog box so you can print the current drawing.
Print Preview	PPREVIEW	Displays the Print dialog box so you can preview the current drawing before you print it.
Print Style	PRINTSTYLE	Sets the current print style for new entities or changes the print style for selected entities.
Print Styles Manager	STYLESMANAGER	Displays the default folder that stores print style tables.
Printer Options	PRINTOPTIONS	Displays the Options - Printing tab so you can manage several printer settings.
Prompt History Window	PMTHIST	Displays the Prompt History window.
Project Geometry	PROJECTGEOMETRY	Creates a projection of lines, curves, or points on a three-dimensional solid, surface, or region using a direction you specify.
Properties	ENTPROP	Displays the current settings for selected entities and allows you to modify them.
Properties Switch	PROPERTIESSWITCH	Toggles the display of the Properties pane.
Publish	PUBLISH or -PUBLISH	Displays the Publish dialog box so you can print one or more drawings and sheets.
Purge	PURGE or -PURGE	Clears the drawing file of unused drawing elements.
Pyramid (3D Mesh)	AI_PYRAMID (or PYRAMID)	Draws a pyramid as a 3D mesh.
Pyramid (3D Solid)	PYRAMID	Draws a three-dimensional pyramid as an ACIS solid.

Q

Quadrant	QUADRANT	Toggles the Quadrant snap on or off.
Quick Block Save	QUICKWBLOCK	Saves entities as a block to a separate drawing file.
Quick CUI	QCUI	Displays a small version of the Customize User Interface dialog box so you can quickly add commands to the Tool Palettes pane.
Quick Dimension	QDIM	Creates a series of dimensions for selected entities.
Quick Group	QGROUP	Creates groups of entities.
Quick Leader	QLEADER	Prints the contents of the active viewport.
Quick New	QNEW	Creates a new drawing without prompting for a template.
Quick Print	QPRINT	Prints the contents of the active viewport.
Quick Properties	QUICKPROPERTIES	Displays the Quick Properties pane.
Quick Save	QSAVE	Saves the current drawing.
Quick Select	QSELECT	Selects entities according to specified options.
Quick Text	QTEXT	Turns Quick Text on or off; when on, text is displayed as placeholder boxes, rather than as characters or words.
Quick Trim	EXTRIM	Trims all entities to the edge of a cutting entity in a single operation.

R

Ray

RAY

Draws an infinite line in one direction from a specified starting point.

Railings	RAILING	Draws an architectural railing.
Real-Time Pan	RTPAN	Allows you to pan the drawing in real time.
Real-Time Zoom	RTZOOM	Allows you to enlarge or reduce the display of the drawing in real time.
Reassociate Dimension	DIMREASSOCIATE	Associates dimensions with a different entity or point on an entity.
Reassociate Entity Data	REASSOCAPP	Associates programs with entity data.
Recompute Drawing	RECOMPUTEDRAWING	Searches for text and tags that are contained in the drawing file and initializes the adjustAlignment function.
Record Script	RECSCRIPT	Displays the Record Script dialog box so you can record a script file.
Recover	RECOVER	Opens and fixes a drawing that you suspect is damaged.
Rectangle	RECTANGLE	Draws a rectangle.
Rectangular Array	ARRAYRECT	Creates multiple copies of entities in a rectangular (rows and columns) pattern.
Redefine	REDEFINE	Restores a built-in command deleted by UNDEFINE.
Redo	REDO	Reverses an UNDO command. You must use the UNDO command before you can use the REDO command.
Redraw	REDRAW	Redraws the entire display, erasing any marker blips that were visible.
Redraw All	REDRAWALL	Redraws all viewports.
Reference Grid	GRID	Displays a grid of dots on the screen used for visual reference.
Regen	REGEN	Regenerates the current viewports.
Regen All	REGENALL	Regenerates all viewports.
Regen Automatically	REGENAUTO	Automatically regenerates a drawing.
Regenarate Dimension	DIMREGEN	Updates the position of associative dimensions in the drawing.
Region	REGION	Creates a three-dimensional solid from an existing two-dimensional entity.
Reload Image	GEOMAPIMAGEUPDATE	Updates map image entities from the mapping service and optimizes their resolution.
Remove from Working Set	REFSET	Removes an entity from the block that is being edited in-place.
Remove Leader Lines	AIMMLEADERREMOVE	Removes one or more leader lines from existing multileader entities.
Rename	RENAME	Changes the names associated with text styles, layers, linetypes, blocks, views, user coordinate systems, viewport configurations, and dimension styles.
Rename Block	RENAMEBLOCK	Creates a new block by renaming a single block instance.
Render	RENDER	Removes hidden lines, and then shades the surface as though it were illuminated from multiple light sources.
Render Settings	SETRENDER	Defines settings for rendering images, such as smoothing, base materials, and shadow resolution.
Reset Dimension Text	DIMREASSOC	Removes overrides made to dimension text and returns the dimension to its original value.
Reset User Interface	RESETUI	Resets CUI user interface customization to the default.
Restart Script	RSCRIPT	Restarts a command script from the beginning.
Resume	RESUME	Resumes an interrupted command script.
Reverse	REVERSE	Reverses the direction of selected lines, polylines, splines and helixes by swapping the vertices of each segment.
Revision Cloud	REVCLOUD	Draws cloud shapes which are used to mark where revisions have been made in a drawing.
Revolve	REVOLVE	Creates a three-dimensional solid by revolving an existing two-dimensional entity around a selected axis, line, polyline, or two points.
Revolved Surface	REVSURF	Creates a three-dimensional polygon mesh approximating a surface of revolution by rotating a curve around a selected axis.
Ribbon	RIBBON	Turns the display of the ribbon on.
Ribbon Close	RIBBONCLOSE	Turns the display of the ribbon off.
Roof	ROOF	Draws an architectural roof.
Roof Slab	ROOFSLAB	Draws an architectural roof slab.
Rotate	ROTATE	Rotates existing entities around a specified rotation point.
Rotate Text	TORIENT	Changes the orientation of single-line text, multiline text, attribute definitions, and block attribute text.
Ruled Surface	RULESURF	Creates a three-dimensional polygon mesh approximating a ruled surface between two curves.
Run Script	SCRIPT	Displays the Run Script dialog box, allowing a script command to be carried out.

S

Save	SAVE	Displays the Save Drawing File As dialog box so you can save the current drawing. You can also save the drawing using a different name.
Save All	SAVEALL	Saves all open drawings.
Save As	SAVEAS	Displays the Save Drawing File As dialog box so you can save the current drawing.
Save Block	BSAVE	Saves modifications to the current block. Available only in the Block Editor.
Save Block As	BSAVEAS	Opens the Save Block As dialog box. Saves the current block with a different name. Available only in the Block Editor.
Save Block to Disk	WBLOCK or -WBLOCK	Saves a block, entire drawing, or entities to a separate drawing file.
Save Layer State	LAYERSTATESAVE	Opens the New Layer State dialog box where you can specify the name and description for a new layer state.
Save Workspace	WSSAVE or -WSSAVE	Saves the current menu, toolbar, and ribbon visibility settings to a new or existing workspace.
Scale	SCALE	Changes the size of entities proportionally.
Scale List	SCALELISTEDIT or -SCALELISTEDIT	Defines the scales that are available to assign to annotative entities.
Scale Text	SCALETEXT	Changes the scale of existing text entities, either enlarging them or reducing them.
Scroll Bars	SCROLLBAR	Turns the scroll bars around the drawing window on or off.
Section	SECTION	Creates a cross section through a solid as a region or block.
Section Line	SECTIONLINE	Creates a section line which determines a two-dimensional projection of the area you want to view.
Section Line Generate	SECTIONLINEGENERATE	Adds a new two-dimensional projection from an existing section line.
Section Plane	SECTIONPLANE	Draws a plane that creates a cross-section of a model which is used to view and analyze it.
Section Plane Settings	SECTIONPLANESETTINGS	Opens the Section Plane Settings dialog box.
Security	SECURITY	Displays the Security dialog box so you can set security restrictions for running macros in progeCAD.
Select	SELECT	Groups entities into a selection set for use in subsequent commands.
Select All	SELGRIPS	Displays the grips of selected entities.
Select Similar	SELECTSIMILAR	Searches for entities that match properties of other entities. The entities with properties that match are then added to the selection set.
Selection Filter	SELFILTER	Displays the Selection Filter pane, which displays all entities in the drawing and allows you to filter and select entities by layer, color, entity type, and linetype.
Selection Filter Close	SELFILTERCLOSE	Closes the Selection Filter pane.
Send Feedback	SENDFEEDBACK	Opens the Send Feedback dialog box so you can provide enhancement requests, report issues, and more.
Send Hatches Back	HATCHTOBACK	Changes the draw order of hatches to be drawn and printed behind all entities in a drawing.
Send Mail	MAIL	Activates a mail program so you can send an progeCAD drawing file via electronic mail.
Set Location	GEO	Attaches geographic location data to a drawing file.
Set Layer by Entity	LAYMCUR	Sets a new layer as the current layer.
Set to ByLayer	SETBYLAYER	Sets properties to ByLayer for selected entities.
Set UCS	SETUCS	Displays the user coordinate systems dialog box so you can select the current UCS from the list of preset definitions.
Set Z All	SETZ	Changes z-coordinates of all entities contained in the drawing to a new value that you specify.
Shade	SHADE	Shades models in the current viewport.
Shape	SHAPE	Allows you to insert shapes from a compiled shape file (.SHX) into your drawing.
Sheet Set Manager	SHEETSET	Displays the Sheet Set Manager pane which allows you to view, organize, and publish sheet sets.
Show CV	CVSHOW	Displays the control vertices of selected NURBS surfaces and curves.
Show Edges	SHOWEDGES	Shows all edges of a 3D face, mesh, or polyface mesh.
Show Palettes	SHOWPALETTES	Reverses the HIDEPALETTES command so that the ribbon, the quick access toolbar, all previously-hidden palettes, and drawing tabs are redisplayed.
Single Session	SINGLETON	Allows you to determine whether progeCAD can be started one time or multiple times simultaneously.
Slab	SLAB	Draws an architectural slab.
Slice	SLICE	Creates a new entity by cutting the original entity and removing a specific side.
Snap	SNAP	Restricts cursor movement to specified increments.
Solids Editing	SOLIDEDIT	Modifies three-dimensional solids.
Sphere (3D Mesh)	AI_SPHERE (or SPHERE)	Draws a three-dimensional spherical entity as a 3D mesh.
Sphere (3D Solid)	SPHERE	Draws a three-dimensional spherical entity as an ACIS solid.
Spline	SPLINE	Draws a curved polyline.
Spot Light	SPOTLIGHT	Adds a spot light to your drawing for rendering.
Stairs	STAIR	Draws an architectural stair.
Start Page	GOTOSTART	Switches from the current drawing to the Start page.
Status Bar	STATBAR	Turns the status at the bottom of the window on or off.
STEP In	STEPIMPORT	Displays the Import STEP File dialog box so you can import a STEP (Standard for the Exchange of Product) model data file.
STEP Out	STEPEXPORT	Allows you to export ACIS entities such as surfaces, regions, and solids to a STEP (Standard for the Exchange of Product) model data file with an .step, .ste or .stp extension.
STL In	STLIN	Displays the Import STL File dialog box so you can import an STL (Stereolithography) file.
STL Out	STLOUT	Allows you to export three-dimensional solids to an STL (Stereolithography) file with an .stl extension.
Steel	STEEL	Creates 2D and three-dimensional steel shapes of different types.
Stop Recording	STOPSCRIPT	Stops the recording of scripts.
Stretch	STRETCH	Moves a portion of a drawing while retaining connections to other parts of the drawing.
Studs, Joists, Track	SJT	Creates 2D and three-dimensional shapes in the following categories: Studs, S Studs, Joists, Track.
Subtract (3D Solid)	SUBTRACT	Creates a composite three-dimensional solid by subtracting two or more solids.
Super Hatch	SUPERHATCH	Hatches an area using a selected image, texture, block, external reference, or wipeout.
Sweep	SWEEP	Creates a three-dimensional solid or surface by sweeping an entity along a path.
Switch Tab	CTABNEXT, CTABPREV	Allows you to navigate to the next or previous tab in the current drawing.
Switch to Model Tab	MODEL	Switches from a layout tab to the Model tab.
Switch Window	SWITCHWINDOW	Lists all drawing windows that are open and allows you to switch between, save, or close them.
Synchronize Attributes	ATTSYNC	Updates all block instances with the changes made to a block attribute.
Synchronize Multiple-Scale Positions	ANNORESET	Returns scale views of annotative entities to their default locations.
Synchronize Viewports	VPSYNC	Synchronizes multiple layout viewports so that they look like parts of one viewport.
System Variables Manager	SYSVARMONITOR	Displays and manages progeCAD system variables and their properties.
System Windows	SYSWINDOWS	Rearranges open drawing windows and icons.

T

Table	TABLE	Inserts a table in the drawing.
Table Styles Manager	TABLESTYLE	Allows you to create and modify table styles.
Tangent	TANGENT	Toggles the Tangent snap on or off.
Text	TEXT	Creates text entities.
Text Fit	TEXTFIT	Fits the width of single-line text to new starting and ending points.
Text to Front	TEXTTOFRONT	Moves text, dimensions, and leaders to the front of other entities.
Text to Multiline Text	TXT2MTXT	Converts text entities to a multiline text entity.
Text Styles Manager	STYLE or -STYLE	Creates or changes current text fonts (styles).
Thicken	THICKEN	Converts surfaces or meshes into three-dimensional solids with a specified thickness.
Thickness	THICKNESS	Sets the thickness for all new entities.
Tile Horizontally	WHTILE	Horizontally tiles the open drawing windows.
Tile Vertically	WVTILE	Vertically tiles the open drawing windows.
Time Variables	TIME	Displays the drawing creation and update times; also permits control of an elapsed timer.
Tip of the Day	TIPOFDAY	Displays the Tip of the Day dialog box.
Tolerance	TOLERANCE	Displays the Geometric Tolerance dialog box so you can define the maximum allowable geometric variations in the current drawing.
Toolbars	TOOLBAR or -TOOLBAR	Opens the Toolbar Settings dialog box so you can specify the toolbars you want displayed and other options.
Tool Palettes	TOOLPALETTES	Displays the Tool Palettes pane.
Tool Palettes Close	TOOLPALETTESCLOSE	Closes the Tool Palettes pane.
Tool Palettes Navigate	TPNAVIGATE	Opens the Tool Palettes pane at a specified tool palette or palette group.
Torus (3D Mesh)	AI_TORUS (or TORUS)	Draws a torus as a 3D mesh.
Torus (3D Solid)	TORUS	Draws a three-dimensional torus as an ACIS solid.
Total Area	TOTALAREA	Calculates a running total area of entities in a selection set.
Total Length	TOTALLENGTH	Calculates a running total length of entities in a selection set.
Trace	TRACE	Draws a two-dimensional solid line of specified width.
Tracking Point	TT	Sets a temporary tracking point (available while using a command that requests a point).
Transparency	TRANSPARENCY	Turns transparency on or off for the selected image.
Trim	TRIM	Erases the portions of selected entities that cross a specified boundary.

U

UCS	UCS	Defines or modifies the current user coordinate system; see also EXPUCS.
UCS Icon	UCSICON	Turns the display of the UCS icon on or off.
Undefine	UNDEFINE	Allows a command defined by another program to override an progeCAD command.
Undelete	UNDELETE	Restores erased entities.
Undo	U	Reverses the effect of the previous command.
Ungroup	UNGROUP	Breaks a group into its separate source entities.
Undo Multiple	UNDO	Reverses the effect of the previous command; also reverses the effect of multiple commands and provides control of the UNDO command.
Union (3D Solid)	UNION	Creates a composite three-dimensional solid by combining two or more solids.
Unisolate Entities	UNISOLATEOBJECTS	Restores the display of entities that were hidden with the Hide Entities and Isolate Entities commands.
Units	UNITS	Selects coordinate and angle display formats and precision.
Update Field	UPDATEFIELD	Automatically updates fields that are contained in selected entities.
User Guide	USERGUIDE	Displays the Using progeCAD guide in PDF format.

V

Variable Settings

SETVAR

Displays or changes system variables.

Validate Digital Signatures	SIGVALIDATE	Displays information about the status of the digital signature attached to the current drawing.
VBA Add-In Manager	VBALOAD	Manages the Microsoft Visual Basic for Applications (VBA) programs.
VBA Load Project	VBILOAD	Loads a VBA project file (.vbi file).
VBA Macros	VBARUN or -VBARUN	Allows you to run a VBA macro.
VBA Run Add-In	ADDINRUN	Allows you to run a VBA function.
View Cube	NAVVCUBE	Displays a navigation tool, called view cube, when working in 2D model space or 3D visual styles.
View Manager	VIEW or -VIEW	Manages named views so you can create, rename, and redefine named views.
View Resolution	VIEWRES	Controls the precision and speed of drawing circles and arcs by specifying the number of sides in a circle.
View Snapshot	VSNAPSHOT	Displays the View Snapshot dialog box so you can view a previously created slide file.
View Transitions	VTOPTIONS	Displays the View Transitions dialog box where you can set the duration and performance of smooth view transitions.
Viewpoint	VIEWPOINT	Selects the viewpoint for a three-dimensional visualization.
Viewport Layer	VPLAYER	Controls properties and visibility of layers in layout viewports.
Viewports	VIEWPORTS	Divides the graphics display into multiple viewports, each of which can contain a different view of the current drawing.
Visual Basic Editor	VBA	Starts the Microsoft Visual Basic for Applications (VBA) program and displays the VBA window.
Visual Styles	VSCURRENT	Displays a drawing using the chosen style.

W

Walls	WALL	Draws an architectural wall.
Web Light	WEBLIGHT	Adds a web light to your drawing for rendering.
Wedge (3D Mesh)	AI_WEDGE (or WEDGE)	Draws a wedge as a 3D mesh.
Wedge (3D Solid)	WEDGE	Draws a three-dimensional wedge as an ACIS solid.
Windows	WINDOW	Draws an architectural window.
Wipeout	WIPEOUT	Creates wipeout entities and turns their frames on or off.
WMF Out	WMFOUT	Exports a Windows metafile.
Wood	WOOD	Creates 2D or three-dimensional wood details in the following categories: Lumber and TJI Joists.
Workspace	WORKSPACE	Creates, sets current, renames, or deletes a workspace. Also defines settings for the workspace environment.
Workspace Settings	WSSETTINGS	Allows you to define settings for how progeCAD works with workspaces.
Workspaces	PMSPACE	Displays the Workspaces dialog box, from which you can create viewports and select the type of workspace in which you want to work.

X

XLS In	XLSIMPORT	Displays the Import Excel File dialog box so you can import an .xls or .xlsx file.
XOR Toggle	XORTOGGLE	Determines whether a logical XOR is used for the color of the cursor and entity snap markers.
Xplode	XPLODE	Breaks apart a complex entity into separate entities and sets properties for the newly separated entities.
Xref Manager	XREF or -XREF	Allows you to manage external drawings that you have in the current drawing, without changing their content.
Xref Layer Visibility	VISRETAIN	Saves modifications to external reference layers.
Xref Open	XOPEN	Opens an external reference for editing without having to open the Xref Manager.

Y

Z

Zoom

ZOOM

Enlarges or reduces the display of the active drawing.