en
italiano
čeština
Deutsch
français
hrvatski
magyar
polski
српски
русский
中文
中文
한국어
españolHelix (Facet Model Mesh) -NOT SUPPORTED YET-
(
)
Keyboard: FMHELIX
Draws a spiral-shaped entity as a facet model mesh.
Specify the tube radius: Enter the value, or specify two points to define the radius of the helix body (tube).
Specify center point of base: Specify the center point of the helix base.
Specify base radius or [Diameter]: Specify the radius (or diameter) of the bottom of the helix.
Specify top radius or [Diameter]: Specify the radius (or diameter) of the top of the helix.
Specify helix height or [Axis endpoint/Turns/turn Height/tWist]: Specify the height of the helix.
To specify the axis direction instead of helix height
Choose Axis endpoint.
Specify axis end point: Specify the endpoint of the helix, which determines the position and direction of the helix.
To specify the number of turns
Choose Turns.
Enter number of turns: Specify the number of full turns. The default number of turns is three. The maximum is 500.
To specify the turn height
Choose turn Height.
Specify distance between turns: Specify the height of one full turn.
To specify the direction of turns
Choose tWist.
Enter twist direction of helix [CW/CCW]: Specify the direction of helix turns, which can be clockwise (CW) or counterclockwise (CCW).