Roof Slab (not supported yet)

()

Keyboard: ROOFSLAB

Draws an architectural flat roof. A roof slab is similar to a slab except it is drawn above walls instead of below.

To draw a roof slab

Specify start point of roof slab contour or [Convert 2D entities to roof slab/Thickness(6.0000)]: Specify the start point of the roof slab. Or choose Thickness to enter a new thickness for the roof slab.

Specify next point or [Arc/Close/Undo]: Specify the endpoint of each segment, then press Enter when done or Close to add the last endpoint at the start point. Choose Arc to add an arc segment to the roof slab.

To convert 2D entities to roof slabs

Specify start point of roof slab contour or [Convert 2D entities to roof slab/Thickness(6.0000)]: Choose Convert.

Select lines, arcs or polylines to convert to a roof slab contour: Select the 2D entities to convert to roof slabs, then press Enter.

Erase layout geometry? [Yes/No] <No>: Choose Yes to delete the selected 2D entities. Choose No to retain the selected 2D entities.

Edit the roof slab.

After you draw a roof slab, you can modify it as you would other entities using modify entity commands. For example, roof slabs can be easily moved and resized relative to a wall. You can also use the Properties pane to change the thickness, style, etc. And when you select a roof slab, grips display allowing you to resize and reorient the roof slab in real-time.

Tell me about...

Roof

Slab

Walls