Modifying an existing sheet list

Open, or load, an existing sheet list (.dsd file) to modify it. During loading, drawings that are specified in the sheet list must be accessible in the referenced folder location.

To modify a sheet list

   1   Do one of the following to choose Publish ():

    On the ribbon, choose the Application button, then choose Publish > Publish, or choose Output > Publish.

    On the menu, choose File > Publish.

    On the Standard toolbar, click the Publish tool.

    Type publish and then press Enter.

   2   Click Load.

   3   Locate and select the .dsd file to modify.

   4   Click Open.

   5   To add sheets, do the following:

    Click Add, or press insert when a sheet is selected.

    Select one or more drawings that contain the models and layouts you want to add as sheets.

    Click Open.

   6   To remove unwanted sheets from the sheet list, select a sheet, then click Remove or press delete.

   7   To assign a different page setup to a sheet, select a page setup from the list for the sheet. To change the page setup, do the following:

    Select the sheet and click Edit. You can also double-click the sheet.

    Select the page setup to change, then click Modify.

    Make your selections, then click OK.

    Click Close.

   8   To publish a sheet using a specific layer state, select the layer state for the sheet in its Layer State column. The list displays all layer states created for a drawing.

   9   To move sheets up or down in the list, select the sheet and click Move Up or click Move Down. Sheets are published in the order in which they display.

   10   Click Save.