Drawing construction lines by specifying the angle

You can also draw construction lines at a specific angle or at an angle relative to an existing entity.

To draw a construction line at a specified angle relative to another entity

   1   Do one of the following to choose Construction Line > Angled ():  

    On the ribbon, choose Draw > Construction Line > Angled.

    On the menu, choose Draw > Construction Line > Angled.

    On the Construction Line toolbar, click the Angled tool.

    Type cline, choose Angle, and then press Enter.

   2   In the prompt box, choose Reference.

   3   Select the reference entity.

   4   Specify the angle of the construction line in relation to the selected entity.

   5   Specify the location of the construction line.

   6   To complete the command, press Enter.